top of page
3d printed plane Super Tucano by Planeprint
Logo Super Tucano Planeprint
3D printing profiles Cura

Cura 4.12.1 required! More info here ...


Fully 3D printable scale RC airplane developed by René Marschall

  • Wingspan/Lenght: 1300 mm (51.2 inches)

  • Flight weight: 2080 g

  • Wingload: 65g/dm2

  • 6-channel: (gas, aileron, elevator, rudder, nose wheel)

  • Material: PLA approx. 1500 g/TPU approx. 100 g

  • Motorization: 3S or 4S

    Printer space of 200x200x200 mm (cube) needed!

     NOTE  Slicing only works with CURA! look here why…

The AT-29 Super Tucano

The AT-29 Super Tucano is a two-seater training aircraft of the Brazilian manufacturer Embraer. We have tried to make this aircraft as true to the original as possible as an RC model. Although the wings, rudder and elevator are not enlarged, our Super Tucano has absolutely uncritical, very pleasant flight characteristics. To achieve this, we have used a relatively thin airfoil. 

This is also one of the reasons (besides the higher cost and weight) why we did not use a retractable landing gear. The Planeprint Super Tucano has a fixed landing gear that is almost entirely 3D printed. 

Our Tucano has several design innovations, such as the internally ventilated spinner, a new frame design for the inside of the fuselage or the TPU-decoupled front and main landing gear.

Fully 3d printed plane Super Tucano


Download our free PRINTING & ASSEMBLING MANUAL, here you can see exactly what to expect before you decide to buy the STL data.

3d printing manual for the Super Tucano

PDF MANUAL V1.4 free for download

We are constantly improving the manuals. Check if you have the latest version.

Here are some new spare parts for your Super Tucano. It's worth taking a look …

bottom of page