top of page
Planeprint OV10 Bronco 3d printed rc plane rendering
OV10 Bronco Planeprint
3d printing profiles


Fully 3D printable twin-engine Aircraft designed and developed by René Marschall

  • Wingspan: 1400 mm (55.1 inches)

  • Flight weight: 2850 grams

  • Wingload: 65g/dm2

  • 9 channel

  • Motorization: twin-engine 4S

  • Material: LW-PLA 1100g/PLA 400g/TPU 100g

  • Printer space of 200x200x200 mm (cube) needed!

Planeprint OV10 Bronco 3d printed plane

The OV-10 Bronco is a versatile military aircraft known for its rugged design and ability to perform a variety of missions. Its versatility, durability and ability to operate from short and unprepared airstrips made it a valuable tool for close air support and reconnaissance. The Bronco has served with various countries around the world.

The decisive factor in the designing the OV10 as a fully 3D printable model is the high main landing gear. Only the development of the very effective suspension with simple steel wires, which was already successfully used in the Planeprint L39 Albatros, made it possible to finally realize this model.

The OV10 Bronco is our first twin-engine model and is largely built using the proven P5 method from LW PLA. You can build your own individual model in different versions, with A or D nose, with or without pylons on the fuselage.

The flight characteristics of the Planeprint OV10 are very pleasant thanks to the large wing area and the four landing flaps, and the big wheels also feel very comfortable on grass runways. The retractable landing gear and the unusual double fuselage design make it look fantastic on the ground and in the air.

Planeprint OV10 bronco and its designer Rene Marschall
Planeprint OV10 Bronco plan
Planeprint OV10 Bronco all printed parts


Download our free PRINTING & ASSEMBLING MANUAL, here you can see exactly what to expect before you decide to buy the STL data.

Planeprint OV10 Bronco manual sites

PDF MANUAL V1.1 free for download

We are constantly improving the manuals. Check if you have the latest version.


Here are some new spare parts for your OV10. It's worth taking a look …

Links to recommended accessories:


Retract Nose:


3DJake Tough PLA:

With the affiliate links (marked in blue), I am supported by a small commission on a purchase - of course without increasing the purchase price for you.

bottom of page