SWIFT S1
3D printable Indoor and Park Flyer designed by René Marschall
-
Wingspan: 1400 mm (55.1 inches)
-
Flight weight: 190 grams
-
Wingload: 10g/dm2
-
4 channel
-
Optional auxiliary motor 2S
-
Material: LW-PLA 100g/PLA 20g
-
Printer space of 200x200x200 mm (cube) needed!
The Planeprint Swift S1 is the start of a series of super-lightweight scale models that are also suitable for larger indoor halls or small outdoor areas. To be suitable for indoor use, an extremely low wing loading is required, which cannot be achieved even with LW 3D printing filaments. But the combination with lightweight foam sheets (Depron, EPP, polystyrene) makes it possible.
The fuselage and the D box of the wing are printed from LW PLA in Vase mode (Spiralize in Cura) without retract, reinforced with carbon and supplemented with foam plates. This enables very light models that still look like scale airplanes and not just glued panels. The flight characteristics of the Planeprint Swift S1 are very simple and slow.
The Swift S1 is only available in the tow release version and can be towed with any park or shock flyer, just hang a line on the motorized model and have fun!
If you want to run your Swift S1 with a motor and start it from the ground, you can download a free motor upgrade here. The motor is pluggable and can be removed and refitted in one easy step.
INNOVATIVE FEATURES
Download our free PRINTING & ASSEMBLING MANUAL, here you can see exactly what to expect before you decide to buy the STL data.
PDF MANUAL V1.1 free for download
We are constantly improving the manuals. Check if you have the latest version.