PRINTING MANUAL
IMPORTANT For slicing all Planeprint models, four profiles have to be created in Cura:
PROFILE P1_fullbody, PROFILE P2_hollowbody, PROFILE P3_surface, PROFILE P4_flex
PROFILE P3_SURFACE Colorfabb LW-PLA
The following parts must be sliced with the profile P3_SURFACE (1-wall-print). Recommended additional settings are listed in the screenshots. Click on the image and note the additional settings!
PLEASE NOTE In profile P3_SURFACE, there should not be more than one STL on the buildplate at the same time, otherwise slicing errors can occur! Depending on your printer, a brim may not be required.